User's Manual

or
15
Connecting to TV
Connect cable(s) to the appropriate
connection on the back of the Joey. Joey
supports HDMI technology or RCA-type
connections.
Connect the other end of the cable to the
appropriate input of your TV or monitor.
Conrm that both your TV and the Joey are
connected to a power outlet.
Turn on the Joey and TV. Change your TV to
the correct input or source. Consult your TV
user’s guide for assistance.
If this is the rst time that the Joey has been
turned on, the Setup Wizard appears. See
page 17 for going through the Setup Wizard.
Note: In most cases, connecting the HDMI
cable provides plug-and-play control of the
TV’s display resolution and other settings.
However, your TV may require selecting a
different format to display from the Joey during
setup.
Turn up the volume on your TV and conrm
you have sound. If you don’t have sound, your
system may require you to connect audio (red
and white) RCA-type cables between the
Joey’s Audio Outputs and the TV’s audio input
connections.
1
2
4
3