User's Manual

Yes
OR
No
Save
20
Using the remote, turn the device on and
try some other remote buttons to make
sure they work. When nished, press and
release SAT to switch modes.
If the code worked for other buttons, select
Yes and continue to step 11. If the code did
not work, select No and return to step 6 for
the next code for the brand of your device.
On the Remote Manager screen,
conrm that the device’s brand name is in
parentheses after a four-digit code. Select
Save.
To protect these settings, consider
backing them up (see Backing Up
Settings on page 24).
Programming Remote to Control
Another Device, continued
10
11