User's Manual
or
11
Connecting to TV
Connect cable(s) to the appropriate connection
on the back of the Super Joey receiver. This
receiver supports HDMI technology or RCA-
type connections.
Connect the other end of the cable to the
appropriate input of your TV or monitor.
Conrm that both your TV and the Super Joey
receiver are connected to a power outlet.
Turn on the Super Joey receiver and TV.
Change your TV to the correct input or source.
Consult your TV user’s guide for assistance.
If this is the rst time that the Super Joey
receiver has been turned on, the Receiver
Setup Wizard appears. See page 13 for going
through the Setup Wizard. Note: In most
cases, connecting the HDMI cable provides
plug-and-play control of the TV’s display
resolution and other settings. However, your
TV may require selecting a different format to
display from the Super Joey receiver during
setup.
Turn up the volume on your TV and conrm
you have sound. If you don’t have sound, your
system may require you to connect audio (red
and white) RCA-type cables between the
Super Joey receiver’s Audio Outputs and the
TV’s audio input connections.
1
2
4
3