User's Manual

Do not charge the product at high ambient temperatures.
Handle the product carefully to avoid static electricity discharge into the product. Static
may damage sensitive protection components and cause failures.
Do not charge the product when ambient temperatures are below 0°C or above 35°C
(32°F or above 95°F).
If the product emits odor, generates heat, becomes discolored or deformed, or in any
way appears abnormal during use, recharging or storage, immediately remove it from
the charger and stop using it.
The product should be stored at room temperature. Product should be charged once
every 3 months while storing.
Operate CameraLink with a minimum separation distance of 5mm between it and all
persons to maintain electromagnetic field exposure within permitted limits.
Explanation of symbols
Power button (waiting for correct symbol)
Complies with Battery Charger efficiency regulations (waiting for correct symbol)
Lightning
For added protection of this product during a lightning storm, or when it is left
unattended and unused for long periods, unplug it from the wall outlet.
Servicing
Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified
service personnel. Contact your local office for servicing information.
Damage requiring service
Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
• When the power-supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally by following the operating instructions.
Adjust only those controls covered by the operating instructions. An improper
adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to its normal
operation.
• If the product has been dropped or damaged in any way.
• When the product exhibits a distinct change in performance.