P-BUA-TRANSIT-T Wiring Harness for Backup Alarm 2015-2021 Ford Transit INSTALLATION MANUAL
Thank you for purchasing the P-BUA-TRANSIT-T Table of Contents Page 3 - Tools Required For Installation WHAT’S INCLUDED: • Vehicle Specific Wire Harness (P-BUA-TRANSIT-T) COMPATIBLE ACCESSORIES: • 97dB Backup Alarm (BUA-97C) • 97dB White Noise Backup Alarm (BUA-97WNC) 2
TOOLS REQUIRED: 1. 2. 3. 4. 1. 10mm Nut-setter 2. #2 Phillips Bit 3. Impact Drill 4.
STEP 1: Locate the in-line trailer tow harness connector that is below the vehicle STEP 2: Unplug the OEM connector and install the P-BUA-TRANSIT-T harness between the OEM connectors Note: Vehicles without a trailer tow connector will be equipped with a sealed plug • Install the sealed plug onto the male end of the P-BUA-TRANSIT-T harness Vehicle that is not equipped with trailer tow wiring 4 Vehicle that is equipped with trailer tow wiring
STEP 3: Use an impact drill and 10mm nut-setter to install a compatible backup alarm on the underside of the vehicle Note: (2) 10mm TEK screws are provided with the compatible backup alarm STEP 4: Use an impact drill and #2 Phillips bit to attach the P-BUA-TRANSIT-T ground ring to the vehicles chassis with a 1/2” self tapping fastener STEP 5: Plug the backup alarm connector into the mating connector on the P-BUA-TRANSIT-T harness. Secure any excess wiring with cable ties.
Phone – 866-766-2267 E-Mail – support@aampglobal.com EchoMaster is a Power Brand of AAMP Global EchoMaster.
