P-BUA-SILVERADO Wiring Harness for Backup Alarm 2016-2021 Chevrolet Silverado INSTALLATION MANUAL
Thank you for purchasing the P-BUA-SILVERADO Table of Contents Page 3 - Tools Required For Installation WHAT’S INCLUDED: • Vehicle Specific Wire Harness (P-BUA-SILVERADO) COMPATIBLE ACCESSORIES: • 97dB Backup Alarm (BUA-97C) • 97dB White Noise Backup Alarm (BUA-97WNC) 2
TOOLS REQUIRED: 1. 2. 1. 10mm Nut-setter 2.
STEP 1: Locate the OEM tail lamp connector that is below the truck - The connector is to the left of the vehicle’s spare tire on the cross member STEP 2: Unplug the OEM connector STEP 3: Install the P-BUA-SILVERADO harness between the two OEM connectors 4
STEP 4: Use an impact drill and 10mm nut-setter to install a compatible backup alarm on the metal surface that is below the truck’s tail lamp cavity (just outside and above the driver side frame rail).
Phone – 866-766-2267 E-Mail – support@aampglobal.com EchoMaster is a Power Brand of AAMP Global EchoMaster.
