Installation Guide

9
Installation Guide
9
tel - 1-800-477-2267
email - [e-mail]
Illustrations are typical and may not match exact vehicle detail
EMUBCAMKIT
Universal Quad View Camera Kit
Step 4
Routing The Camera Cables:
Attach a Camera Extension Cable to each
camera and route the camera cables to the
video interface inside the vehicle. Follow the
factory wiring harnesses whenever possible.
Secure with zip ties. Most vehicles will have
rubber grommets located in the floor that will
allow the cables to be safely passed from the
outside to the inside.
Adding a piece tape and notating the
camera position on the ends of the Camera
Extension Cables will make identification
inside the vehicle easier.
NOTE