Installation Guide

13
Installation Guide
13
tel - 1-800-477-2267
email - [e-mail]
Illustrations are typical and may not match exact vehicle detail
EMUBCAMKIT
Universal Quad View Camera Kit
Follow these instructions if you are connecting to:
• After-market radio with Rear camera input, rear camera installed and On-screen option to turn-on camera
• Factory radio with a camera interface that can turn on the camera input manually.
Wiring Guide 2
Step 1
Connect the Brown wire on the Power
Switch to Ground.
Step 2
Connect the Blue wire on the Power
Switch to the Black wire on the AVS-21
harness.
Step 3
Connect the Red wire on the AVS-21 to
Accessory +12V.
Note
The Power Switch needs to be reachable
to switch the video signal from the rear
camera to the video interface.
2
3
1
This type of installation requires using the Power Switch and the PAC AVS-21 to switch the video signal
between the rear camera and the video interface.
ACC +12V
GROUND
CONTINUED ON NEXT PAGE...