#YourGearUpgraded Duel Screen Monitor Mount for Gaming INSTRUCTION MANUAL Model Echo-gm2Fc
IMPORTANT SAFETY INSTRUCTIONS. READ ENTIRE MANUAL PRIOR TO quest. SAVE These INSTRUCTIONS. Before You EmBark on your Quest... just read it so you don’t get pwned! "Hopefully you are unscathed after detonating the mount from the packaging!..." Please read through these instructions completely and check your monitors' owner manual to see if there are any special requirements for mounting your monitor.
Size up Your Mounting Surface 0.8 in. - 2.6 in. (20 mm - 66 mm) DESKTOP THICKNESS ? UUUUHHH ?!? Unsure? Contact The Echogear Pros: 1-855-428-2490 www.echogear.com "No snapinr pics for twitte r til you done!" Yo Hands BOnus Loot! 3 FREE Inside Every Box Hex Keys 3/16 A 5/32 B "Ph the il is bos s" Phillips Screwdriver 3/32 C A A h" .K.
ONE MORE THING ... Echogear Satisfaction Guarantee: We’re driven to give DIYers an awesome install experience. We stand behind everything we make because you deserve the best entertainment experience without sacrificing quality and spending your whole paycheck. Guess what? We’ll help you through the entire process, too. Why? Because we like to help and it’s our passion to provide authentic service. We won’t leave you hanging, no matter what. Our U.S.
Here's your Loadout WARNINGS: DON'T ALLOW CHILDREN TO FEED ON CONTENTS AND NEVER USE DAMAGED GOODS! ►► This product contains small items that are a choking hazard if swallowed. ►► Before you start assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. GEAR FOR LEVEL 1 1 Duel Arm Desk Clamp 1 5 Bumpers 2 2 Clamp Screw 5/16-18 x 4 in.
Gear FOR Level 2 8 Screws M4 X 12mm 10 8 Screws M4 X 30mm 11 8 Spacers 5mm 12 8 Spacers 22mm 13 14 4 Screws 8-32x 3/8 in 15 Gear FOR Level 3 2 Cable Covers 6
Level 1 Lock N' LOAD! Assemble Mount and Clamp To Desk STAGE 1: Plaster Soft Bumpers +5 on Desk Clamp 1 2 7
STAGE 2: Loosen Screw To Lower Clamp 1 A a A USE HEX KEY A TO LOWER CLAMP.
STAGE 3: Tighten Screw To Attach Clamp to Desk 1 A a A b USE HEX KEY A TO SECURELY CLAMP IT DOWN.
STAGE 4: Attach Both Arms to Mount USE HEX KEY A TO TIGHTEN. 4 3 8 9 8 7 5 A N O T E : ALL PARTS ARE THE SAME FOR BOTH SIDES.
Level 2 Make The DROP! Attach Monitor to Mount STAGE 1: Determine Screw Length and Spacer Size NOT NEEDED NEEDED FOR Flat Monitor Flat Monitor Select Spacers Cables Round Monitor + or (if needed) Short Screw Select Screws Inset Holes Long Screw 9 10 or Bracket Bracket 11/12 Spacer 11
STAGE 2: Partially Insert Top Screws into Monitor 10 OR 11 12/13 12
STAGE 3: Hang Monitor by Top Screws onto Bracket 4 13
STAGE 4: Partially Insert Bottom Screws 10 4 OR 11 12/13 14
STAGE 5: Test and Tighten All Screws to Secure Moniter IMPORTANT: YOU SHOULD TEST THE TENSION OF THE ROTATING BRACKET R TO ASSURE THE MONITOR MOVES WITH EASE AND STAYS IN POSITION BEFORE TIGHTENING ALL SCREWS. See page 20 to adjust bracket tension.
STAGE 6: Repeat Level 2 Again to Complete Mission 1 16 2
Level 3 Control the Melee! Route and Disguise Cables STAGE 1: Route All Cables Through Brackets C NOTE: FOR THICKER CABLES USE HEX KEY C TO LOOSEN SCREWS S ON ARM BRACKET AND SLIDE BRACKET OUT.
"U R A BOSS" r rope the p . Then it's e k a ts ics "M tmen me p adjus o post so ation. t t time r battles add: u of yo forget to aded" r Don't GearUpg r u o #Y 18 STAGE 2: Secure Cables with Arm Cover+ 2 I MP O R T A N T : L E AV E E N O U GH S L AC K I N T H E C A B L E S TO ASS U R E T H E MO NI TO R A N D AR MS MOV E WI T H E AS E .
Bonus Level! Adjustments /Modifiers Vertical Position - Adjust Monitor Up and Down TIP: INITIALLY, NEARLY ALL MONITORS WILL REQUIRE POSITIVE ADJUSTMENT (UP TO 20 TIMES). IF THE MONITOR IS NOT STAYING AT DESIRED HEIGHT OR NOT MOVING WITH EASE: • ADJUST TENSION SCREW ON THE TOP OF THE MOUNT. • START BY TURNING 5 OR 6 TURNS, = MORE TENSION OR = LESS TENSION. • REPEAT TURNS UNTIL DESIRED TENSION IS ACHIEVED. NOTE: YOU MAY NEED TO ADJUST HEIGHT OF ARM TO GAIN ACCESS TO SCREW.
Tilt & Level - Tilt and Turn Monitor 360 0 D on ... "Come h me..." it level w WARNING: MONITOR MUST REMAIN OVER DESK SURFACE. IF MONITOR DOES NOT MOVE WITH EASE OR WILL NOT LOCK INTO DESIRED POSTION: Remove the monitor. Turn the screw D on the tension bracket either counter-clockwise (loosen) or clockwise (tighten) D . Repeat as needed.
Horizontal Position - Adjust Monitor Left or Right WARNING: MONITOR MUST REMAIN OVER DESK SURFACE.
How to remove Mount from Monitor and Surface 1. Remove Cables 2. Remove Monitors A 3.
“Wanna show off your skillzz? Share a picture of your completed mount with #YourGearUpgraded. Who knows, it might not be as bad as you thought” Confuzzled? Contact the ECHOGEAR Pros: 1-855-428-2490 helpmehelpyou@ECHOGEAR.com ECHOGEAR.com Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete.
