Use and Care Manual

SRM-3020U OPERATION

X7502350201 23

3. Slide harness clamp up (A) or

down until unit balances with

head approximately 50-75 mm

(2-3 in.) from the ground.

4. Tighten harness clamp screw.

5. Loosen upper U-Handle clamp

screw (B), and position

U-Handle for comfortable

operation.

6. Tighten U-Handle clamp

screws and 8 mm clamp hex

bolt securely.

OPERATION

Moving parts can amputate fingers or cause severe injuries.

Keep hands, clothing and loose objects away from all openings.

Always stop engine, disconnect spark plug, and make sure all

moving parts have come to a complete stop before removing

obstructions, clearing debris, or servicing unit.

Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a

poison gas. Breathing CO can cause unconsciousness, serious

injury, or death. Exhaust can cause serious burns. ALWAYS

position unit so that exhaust is directed away from your face

and body.

Operation of this equipment may create sparks that can start

fires around dry vegetation. This unit is equipped with a spark

arrestor to prevent discharge of hot particles from the engine.

Metal cutters can also create sparks if the cutter strikes rocks,

metal, or other hard objects. Contact local fire authorities for

laws or regulations regarding fire prevention requirements.