Use and Care Manual

MAINTENANCE SRM-3020
40 X7502350000
© 04/2018 ECHO Inc.
◆ Gearcase and surrounding area may be hot.
1. Cut one piece of line to
recommended length.
2.0 mm (0.080 in.) diameter
7.6 m (25 ft.).
2.4 mm (0.095 in.) diameter
7.6 m (25 ft.).
2. Align arrows on top of knob with
openings in eyelets.
3. Insert one end of trimmer line
into an eyelet, and push line
equal distance through trimmer
head.
4. Hold trimmer head while
turning knob clockwise to wind
line onto spool until about
13 cm (5 in.) of each line
remains exposed.
Trimmer head is now fully loaded
and ready for operation.