Use and Care Manual

MAINTENANCE SHC-2620

34 X7502342001

1. Brush loose debris from blade

and coat both sides of blade

with the 50-50 cleaning mixture.

2. Allow cleaning mixture to soften

the remaining gummy residue

then wipe it from the blade.

3. Apply clean oil to the entire

length of the blade. Be certain

the blade bolts are lubricated.

4. Wipe excess oil from the blade

before putting the unit back in

service.

Gear Case

Level 1.

1. Clean dirt from the grease fitting (A).

2. Carefully pump grease into

fitting (A). DO NOT force

grease. Too much pressure will

force grease past seals and

cause damage. Apply 1 - 2

pumps of grease every 15 - 25

hours of operation.

3. Wipe excess grease from

around grease fitting.

Drive Shaft Assembly

Level 1.

Hedge Trimmer blades are very sharp. Touching them may lead

to severe personal injury. Avoid touching blades whenever

possible, and always wear gloves to protect hands.

Parts Required: A grease gun with lithium based grease.

Parts Required: Lithium based grease.