Use and Care Manual

PPF-2620 STORAGE

X7507820500 45

ENGLISH

STORAGE

During operation the muffler or catalytic muffler and

surrounding cover become hot. Always keep exhaust area clear

of flammable debris during transportation or when storing,

otherwise serious property damage or personal injury may

result.

Long Term Storage (Over 30 Days)

Do not store your unit for a prolonged period of time (30 days or longer)

without performing protective storage maintenance which includes the

following:

1. Store unit in a dry, dust free place, out of the reach of children.

Do not store in enclosure where fuel fumes may accumulate or

reach an open flame or spark.

2. Place the stop switch in the “OFF” position.

3. Remove accumulation of grease, oil, dirt and debris from exterior of

unit.

Some tree sap and resins are corrosive. Thoroughly wash the guide

bar and sprocket areas after each use, then coat metal parts with light

oil.

4. Perform all periodic lubrication and services that are required.

5. Tighten all the screws and nuts.

6. Drain fuel tank completely. Press purge bulb 6–7 times to remove

remaining fuel from carburetor then drain the tank again. Close choke,

start and run the engine until it stops due to lack of fuel.

a. Allow engine to cool. Remove the spark plug lead from the spark

plug. Remove the spark plug. Pour 7 cc (0.25 oz.) of fresh, clean,

two-stroke engine oil into the cylinder through the spark plug hole.

b. Pull the recoil starter handle 2–3 times to distribute the oil inside the

engine.