Use and Care Manual

MAINTENANCE PPF-2620
42 X7507820500
© 10/2017 ECHO Inc.
1. Set round file (A) in cutter at
30° angle. One fifth (1/5) of the
file should be exposed above
top cutter edge.
2. Keep file horizontal in cutter
and file in one direction.
3. File until cutter top and side
bevel edges are sharp without
nicks.
4. Place depth gauge tool (B)
firmly on top of cutter with
0.635 mm (0.025 in.) slot and
end against front cutter raker.
File cutter raker with flat file
until flush with top of depth
gauge.
Finish cutter sharpening by
rounding front raker edge (C)
with flat file.
30
°
1
2
90
°
3
°
4
5