Use and Care Manual

PPF-2620 MAINTENANCE
X7507820500 41
© 10/2017 ECHO Inc.
ENGLISH
Filing Standard Saw Chain
Level 2
Check bar part number on your Power Pruner. Chain and guide bar
gauge size must be identical. Use bar and chain combinations shown
in table above.
Dull or damaged cutters will result in poor cutting performance,
increased vibration, and premature saw chain failure.
Always stop engine and disconnect spark plug wire before
servicing guide bar and saw chain. Always wear gloves when
filing saw chain, otherwise serious personal injury may result.
Power Pruner Bar and Chain Combinations
BAR P/N CHAIN P/N
CHAIN
TYPE
LINK
S
PITCH GUAGE
Narrow Kerf
254 mm (10 in.)
narrow bar
P/N 10A4CD3739
90PX39CQ
90
39
9.5 mm
(0.375
in.)
0.043
305 mm (12 in.)
narrow bar
P/N 12A4CD3744
90PX44CQ 44
Regular
254 mm (10 in.)
regular bar
P/N 10A0CD3739
91VXL39C
Q
91
39
9.5 mm
(0.375
in.)
0.050
305 mm (12 in.)
regular bar
P/N 12A0CD3744
91VXL44C
Q
44