Use and Care Manual

PPF-2620 ASSEMBLY

X7507820500 19

ENGLISH

ASSEMBLY

Cutting Attachment to Drive Shaft Installation

Saw Chain is sharp! Always wear gloves when handling

assembly, otherwise serious personal injury may result.

1. Loosen the two (2) screws (A)

and remove locator screw (B)

on cutting attachment.

2. Slide the cutting attachment

onto the shaft housing until the

hole in the neck of the cutting

attachment is aligned with the

hole (C) in the housing. (It may

be necessary to rotate the saw

chain slightly to align the

internal pinion and drive

shaft.).

3. Insert locator screw (B) into

hole (C) and tighten to snug.

4. Tighten bolts (A), clamping the cutting attachment onto the housing.

Saw Chain Adjustment

Always disconnect spark plug wire before servicing cutting

attachment. Wear gloves when handling saw chain, otherwise

serious personal injury may result.

Parts Required: Drive Shaft Assembly, Cutting Attachment.