Use and Care Manual

PE-2620/S TROUBLESHOOTING

X7502350201 35

4. Install and center blade (F) on

inner blade adapter (B).

5. Install outer adapter (E) and nut

(D). Tighten nut (D) firmly,

turning counterclockwise.

Note: Never reuse old split pin.

6. Install new split pin (A) to

secure nut, and bend both legs

of pin counterclockwise around

PTO shaft (C).

TROUBLESHOOTING

Fuel vapors are extremely flammable and may cause fire and/or

explosion. Never test for ignition spark by grounding spark plug

near cylinder plug hole, otherwise serious personal injury may

result.

ENGINE PROBLEM TROUBLESHOOTING CHART

Problem Check Status Cause Remedy

Engine

starts

hard

or Engine

does not

start

Fuel at

carburetor

No fuel at

carburetor

Fuel strainer or

fuel line

obstructed

Clean or replace

See your dealer