Use and Care Manual

PE-2620/S MAINTENANCE

X7502350201 33

1. Check idle speed and reset if

necessary. If a tachometer is

available, idle speed screw (A)

should be set to the

specifications found on

“Specifications” page of this

manual. Turn idle screw (A)

clockwise to increase idle

speed; counterclockwise to

decrease idle speed.

Lubrication

Level 1.

Parts Required: Lithium Grease.

Note: Your debris shield may appear different than the debris shield

shown.

Gear Housing

1. Remove plug (A) and add grease

to gear housing. Do not overfill.

2. Replace plug and tighten

securely.