Use and Care Manual

OPERATION PE-2620

22 X7502341200

5. Choke

After engine fires (or 5 pulls),

move choke (B) to the RUN

( ) (open) position. Firmly

grasp throttle handle and

throttle trigger lockout with left

hand and fully depress throttle

trigger to wide open position.

Pull starter handle/rope until

engine starts and runs.

Release throttle trigger and

allow unit to warm up at idle for

several minutes.

Note: If engine does not start with choke in “RUN” position after 5 pulls,

repeat instructions 2 - 5.

6. Throttle Trigger

After engine warm-up, grip throttle handle and support handle. Depress the

throttle trigger lockout, and gradually depress throttle trigger to increase

engine RPM to operating speed.

Starting Warm Engine

The starting procedure is the same as Cold Start except DO NOT close the

choke, and do not hold throttle trigger fully depressed.

The attachment should not move at idle, otherwise serious

personal injury may result.

Note: If attachment moves, readjust carburetor according to

“Carburetor Adjustment” instructions in this manual or see your

ECHO Dealer.

1. Stop Switch

Move stop switch button (A)

forward away from the STOP

position.