Use and Care Manual

X7502341200 21

PE-2620 OPERATION

ENGLISH

Stored two-stroke fuel may separate. ALWAYS shake fuel container

thoroughly before each use.

Starting Cold Engine

The attachment will operate immediately when the engine starts,

and could result in possible serious injury. Keep movable parts of

the attachment away from objects that could become entangled or

thrown, and surfaces that could cause loss of control.

1. Stop Switch

Move stop switch button (A)

forward, away from the STOP

position.

2. Choke

Move choke lever (B) to COLD

START ( ) position.

3. Purge Bulb

Pump purge bulb (C) until fuel

is visible and flows freely in

the clear fuel tank return line.

Pump bulb an additional 4 or 5

times.

4. Recoil Starter

Lay the unit on a flat area and keep movable attachment parts clear of all

obstacles. Firmly grasp throttle handle and throttle trigger lockout with left

hand and fully depress throttle trigger to wide open position. Rapidly pull

recoil starter handle/rope (D) until engine fires (or maximum five [5] pulls).