Use and Care Manual

X7502341200 15

PE-2620 DESCRIPTION

ENGLISH

1. POWER HEAD - Includes the Engine, Clutch, Fuel System, Ignition

System and Recoil Starter.

2. THROTTLE TRIGGER LOCKOUT - This lever must be held during

starting. Operation of the throttle trigger is prevented unless throttle trigger

lockout lever is engaged.

3. STOP SWITCH - “SLIDE SWITCH” mounted on top of the Throttle Handle.

Move switch FORWARD to RUN, BACK to STOP.

4. SUPPORT HANDLE - FOR LEFT HAND - The support handle can be

repositioned for comfortable operation by loosening the screws and moving

the handle.

5. DEBRIS SHIELD/FLAP - Mounted over the cutting attachment. Helps

protect operator by deflecting debris produced during the edging operation.

6. BLADE - Rotates to provide cutting action.

7. WHEEL - Adjustable up/down, sets depth of blade.

8. DRIVE SHAFT ASSEMBLY - Contains a specially designed liner and the

flexible drive shaft.

9. THROTTLE TRIGGER - Controls engine speed. Spring loaded to return to

idle when released. During acceleration, press trigger gradually for best

operating technique.

10. THROTTLE HANDLE - FOR RIGHT HAND - Contains the Stop Switch and

Throttle Trigger.

11. SPARK PLUG - Provides spark to ignite fuel mixture.

12. TOP GUARD - Protects arm from the hot engine.

13. RECOIL STARTER HANDLE - Pull handle slowly until starter engages,

then quickly and firmly. When engine starts, return handle slowly. DO NOT

let handle snap back or damage to unit will occur.

14. SPARK ARRESTOR MUFFLER OR SPARK ARRESTOR MUFFLER

WITH CATALYST - The muffler or catalytic muffler controls exhaust noise

and emission. The spark arrestor screen prevents hot, glowing particles of

carbon from leaving the muffler. Keep exhaust area clear of flammable

debris.

15. FUEL TANK - Contains fuel and fuel filter.

Shaft Label

Hot Label