Use and Care Manual

PB-8010 H/T MAINTENANCE

X7501200500 43

3. Check idle speed and reset if

necessary. If a tachometer is

available, idle speed screw (A)

should be set to the

specifications found on

“Specifications” Page of this

manual. Turn idle screw (A)

clockwise to increase idle

speed; counter clockwise to

decrease idle speed.

Throttle Cable Adjustment (PB-8010 T only)

Level 1

If engine idle speed changes when blower pipe is moved, or engine will not

reach full wide open throttle speed, adjust throttle cable.

1. Loosen handle adjustment

knob (C) and tilt Tube Throttle

handle forward to expose

Adjustment Screw (D).