Use and Care Manual

Power Blower

oPerator's Manual

sTarTIng Cold engIne

• Recoil starter: Use short pulls - only 1/2-2/3 of rope length for start-

ing. Do not allow the rope to snap back in. Always hold the unit

rmly.

• Rotate throttle handle downward to a comfortable operating position.

1. Throttle Position Lever

Move throttle position lever (A) to START/IDLE DETENT posi-

tion(

2. Choke

Move choke (B) to "Cold Start" (

) position.

3. Purge Bulb

Pump purge bulb (C) until fuel is visible and ows freely in the

clear fuel tank return line.

4. Recoil Starter

Pull recoil starter handle (D) until engine res, or maximum 5

pulls.

5. Choke

Move choke (B) to run (

) position and if necessary, restart

engine.

NOTE

If engine does not start after 5 pulls, repeat instructions 2-5.

NOTE

Allow engine to warm up before use.