Use and Care Manual

PB-2620 MAINTENANCE

X7501190601 29

1. Close choke (COLD START

[

] position). This prevents

dirt from entering the carburetor

throat when the air filter is

removed. Brush accumulated

dirt from air cleaner area.

2. Remove air filter cover. Brush

dirt from inside cover.

3. Remove air filter and lightly brush debris from filter. Replace filter if it is

damaged, fuel soaked, very dirty, or the rubber sealing edges are

deformed. Clean the filter with a neutral detergent. Do not use solvents

for cleaning.

4. If filter can be reused, be certain:

• The entire frame of the filter is securely seated in the housing.

• It is installed with the original side out.

5. Install air filter cover.

Fuel Filter

Level 1.

Fuel is VERY flammable. Use extreme care when mixing, storing

or handling, or serious personal injury may result.

1. Use a clean rag to remove

loose dirt from around fuel cap

and empty fuel tank.

2. Pull the fuel line and filter from

the tank.

3. Remove the filter from the line

and install the new filter.

Parts Required: Tune-Up Kit