Operator's Manual

MAINTENANCE PB-2520

26 X7501190003

4. Control engine speed with

throttle trigger (G), or for

continuous use, set engine

speed with throttle position

lever (B). Rotate throttle

position lever forward for lower

speed, back for higher speed.

5. Use lower speed to blow debris

from hard surfaces.

6. Additional speed may be

necessary to clean debris, snow, etc. from lawns and flowerbeds.

Note: Never use a higher speed setting than necessary to perform a

task. Remember, the higher the engine speed, the louder the

blower noise. Minimize dust by using blower at lower speeds.

Keep debris on your property. Be Smart - be a good neighbor.

MAINTENANCE

Moving parts can amputate fingers or cause severe injuries.

Keep hands, clothing and loose objects away from all openings.

Always stop engine, disconnect spark plug, and make sure all

moving parts have come to a complete stop before removing

obstructions, clearing debris, or servicing unit. Allow unit to

cool before performing service. Wear gloves to protect hands

from sharp edges and hot surfaces.

Operating a poorly maintained unit can result in serious injuries

to operator or bystanders. Always follow all maintenance

instructions as written, otherwise serious personal injury may

result.

Your unit is designed to provide many hours of trouble free service. Regular

scheduled maintenance will help your unit achieve that goal. If you are

unsure or are not equipped with the necessary tools, we recommend that

you take your unit to a Servicing Dealer for maintenance. To help you decide

whether you want to DO-IT-YOURSELF or have the Dealer do it, each

maintenance task has been graded. If the task is not listed, see your Dealer

for repairs.