Operator's Manual

OPERATION PB-2520

22 X7501190003

Starting Cold Engine

1. Stop Switch

Move stop switch (A) away from

the STOP position.

Note: Engine will not run if

safety switch is not

activated.

2. Throttle Position Lever

Move throttle position lever (B)

midway between idle and full

throttle positions.

3. Choke

Move choke (C) to COLD START

(

) (closed) position.

4. Purge Bulb

Pump purge bulb (D) until fuel is

visible and flows freely in the

clear fuel tank return line.

Recoil starter: Use short pulls - only 1/2 to 2/3 of rope for starting. Do

not allow the rope to snap back in. Always hold the unit firmly.

5. Recoil Starter

Place the unit on a flat, clear

area. Firmly grasp throttle

handle (E) with left hand and

rapidly pull recoil starter handle

(F) until engine fires, or

maximum 5 pulls.

6. Choke

Move choke lever to RUN

position (

), and if necessary,

restart engine.