Operator's Manual
Table Of Contents
SAFETY PB-2520
12 X7501190003
©10/2019 ECHO Inc.
Equipment
Use only approved attachments. Serious injury may result from 
the use of a non-approved attachment combination. ECHO, INC. 
will not be responsible for the failure of cutting devices, 
attachments or accessories which have not been tested and 
approved by ECHO. Read and comply with all safety 
instructions listed in this manual.
◆ Do not attempt to modify this product. Serious injury can 
result from the use of any modified product.
◆ Check unit for loose/missing nuts, bolts, and screws. 
Tighten and/or replace as needed.
◆ Do not use blower if any part is missing or damaged.
◆ Have repairs done only by an authorized service dealer.
Moving parts can amputate fingers or cause severe injuries. 
Keep hands, clothing and loose objects away from all openings.
◆ ALWAYS stop engine, disconnect spark plug, and make 
sure all moving parts have come to a complete stop before 
removing obstructions, clearing debris, or servicing unit.
◆ DO NOT start or operate unit unless all guards and 
protective covers are properly assembled to unit.
◆ NEVER reach into any opening while the engine is running. 
Moving parts may not be visible through openings.
Periodically Check fuel system (fuel lines, vent, grommet, fuel 
tank, and fuel cap) for leaks especially if the unit is dropped. If 
damage or leaks are found, do not use unit, otherwise serious 
personal injury or property damage may occur. Have unit 
repaired by an authorized servicing dealer before using.










