Use and Care Manual

PB-2520 TROUBLESHOOTING

X7501190001 31

ENGLISH

1. Start engine, run at idle for one minute.

2. Complete warm up by running at full throttle for 5 minutes, operating

choke twice to clear air from carburetor chambers.

3. Check idle speed and reset if

necessary. If a tachometer is

available, idle speed screw (A)

should be set to the

specifications found on

“Specifications” Page of this

manual. Turn idle screw (A)

clockwise to increase idle

speed; counter clockwise to

decrease idle speed.

TROUBLESHOOTING

Fuel vapors are extremely flammable and may cause fire and/or

explosion. Never test for ignition spark by grounding spark plug

near cylinder plug hole, otherwise serious personal injury may

result.