Operation Manual

16
Maintenance and care
Maintenance and care
Servicing guideline
Maintenance and care
Cleaning air filter
1. Close choke, remove air cleaner cover (B), grids (C), air fil-
ters. Then check and/or clean air filters by washing in a suit-
able solvent when heavily soiled.
2. Dry filters before reinstalling.
WARNING
Observe the following precautions when checking and maintaining your product after use:


Turn the engine off and do not attempt to check or maintain the product until the engine has cooled.
You could burn yourself.

Remove the spark plug cap before performing checks and maintenance.
An accident could occur if the product starts unexpectedly.
IMPORTANT
 Checking and maintenance requires specialist knowledge. If you are unable to check and maintain the product or deal with a
fault yourself, consult your dealer. Do not attempt to dismantle the product.
Area Maintenance Page Before use Monthly
Air filter Clean/Replace 16 •
Fuel filter Inspect/Clean/Replace 17 •
Spark plug Inspect/Clean/Adjust/Replace 18 •
Carburettor Adjust/Replace and adjust - •
Cooling system Inspect/Clean 17 •
Silencer Inspect/Tighten - •
Silencer Clean 17 •*
Starter Inspect - •
Fuel system Inspect 18 •
Screws, bolts and nuts Inspect, Tighten/Replace - •
* Or 100 hours, whichever occurs first.
IMPORTANT
 Time intervals are maximum. Actual use and your experience will determine the frequency of required maintenance.
If you have any questions or problems, please contact your dealer.
NOTE
 Clean air filter (A) after each use.