Use and Care Manual

LBP-56V125 / LBP-56V250

9992220571312

Press the battery capacity indicator (BCI) button (1). The lights (2) will

illuminate according to the batteries capacity level. See chart below:

1 2

Lights Capacity

4 Green Lights The battery is at 80-100%capacity.

3 Green Lights The battery is at 55-79% capacity.

2 Green Lights The battery is at 24-54% capacity.

1 Green Light The battery is at 1-24% capacity.

Lights go out

The battery is under 1% capacity and requires

charging immediately.

This lithium-ion battery is designed with features that protect the lithium-ion

cells and maximize battery life. If the tool stops during use, release the trigger

to reset and resume operation. If the tool still does not work, the battery needs

to be recharged.

The lithium-ion battery can be used in temperatures down to -14°C (6.8°F). Put

the battery on a tool and use the tool in a light duty application. After about a

minute, the battery will warm up and begin operating normally.

• Make sure the battery is fully charged and that the charger is disconnected

before storing.

• Do not store the battery in sunlight, in an excessively warm place, or near

a furnace. The battery life will be shortened.

• If the battery will not be used for 3 months or more, please store the

battery in a room temperature environment. Please fully charge before

storage.

Check Battery Capacity

Battery Protection Features

Storage Tips:

Cold Weather Operation

OPERATION