Use and Care Manual
OPERATION HCS-2810 / 3810
22 X7702248300
© 09/19 ECHO Incorporated
1. Stop Switch
Move stop switch (A) away from 
the STOP position.
2. Purge Bulb
Pump purge bulb (C) until fuel is 
visible and flows freely in the 
clear fuel tank return line. Pump 
bulb an additional 4 or 5 times.
3. Recoil Starter
Place the unit on a flat, clear 
area. Grip the support handle 
(D) securely with right hand, 
and pull the recoil starter handle 
(E) with left hand until engine 
fires.
Note:  If engine does not start 
after 5 pulls, use Cold 
Start Procedure.
A
C
C
B
D
E










