Use and Care Manual

HC-2210/2810 MAINTENANCE
X7702248100 27
© 09/19 ECHO Incorporated
2. Remove air filter cover. Brush
dirt from inside cover.
3. Replace filter if it is damaged,
fuel soaked, very dirty, or the
rubber sealing edges are
deformed.
• Lightly brush debris from
filter.
• Soak heavily soiled filters in
water/detergent solution to
loosen dirt, then brush lightly.
• Rinse with clean water and allow to dry completely before reuse.
4. Install air filter in air filter case.
5. Install air filter cover.
Fuel Filter
Level 1.
Fuel is VERY flammable. Use extreme care when mixing, storing
or handling, or serious personal injury may result.
1. Use a clean rag to remove loose
dirt from around fuel cap and
empty fuel tank.
2. Carefully pull the fuel line and filter
from the tank and install a new
filter.
Note: Federal EPA regulations
require all model year 2012
and later gasoline powered
engines produced for sale in
the United States to be equipped with a special low
permeation fuel supply hose between the carburetor and fuel
tank. When servicing model year 2012 and later equipment,
only fuel supply hoses certified by EPA can be used to
replace the original equipment supply hose. Fines up to
$37,500 may be enforced for using an un-certified
replacement part.
Parts Required: FUEL FILTER