Use and Care Manual

HC-2210/2810 OPERATION
X7702248100 23
© 09/19 ECHO Incorporated
2. Stop Switch
Move stop switch (A) to STOP
position.
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using unit
again.
Rotating operation
This model is equipped with a
roating throttle handle that can be
turned 90° to either side of vertical
operating position to help reduce
operator fatigue and improve
precision trimming.
Always stop the engine before rotating the handle!
Failure to do so could result in serious injury.
To operate
1. Fully release throttle trigger.
2. Push handle release lever.
3. Rotate the handle 90° in the
desired direction and release the
lever. Make sure that the handle
is fully locked into position before
use.
A