Full Product Manual
Table Of Contents
- Operator’s Manual DPPF-2100 Power Pruner®
- Table of Contents
- Introduction
- Servicing Information
- Safety
- For safe use of your product
- International Symbols
- Read the Manuals
- Clear the Work Area
- Keep a Firm Grip
- Keep a Solid Stance
- Kickback
- Handling the Product
- Equipment
- General Safety Warnings and Instructions for the following ECHO tools: Curved Shaft Edger, Straight Shaft Edger, Tiller Cultivator, or Pole Pruner, or DPAS unit configured as a Curved Shaft Edger, Straight Shaft Edger, Tiller Cultivator, or Pole Pruner.
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- Specifications
- Warranty
- Product Registration
- Notes
SPECIFICATIONS DPPF-2100
42 X7508310400
© 8/23 ECHO Incorporated
SPECIFICATIONS
MODEL DPPF-2100
Length 2163 mm (85 in.)
Width 104 mm (4 in.)
Height 219 mm (9 in.)
Weight (without battery) 5.3 kg (12 lb.)
Battery ECHO eFORCE
®
56V series batteries
Type Li-Ion
Battery voltage 56 (rated 50.4)
Capacity See Battery Manual
Charger type ECHO eFORCE
®
56V series charger
Charger input voltage 120V AC 60Hz
Charging time See Battery Manual
Operating Rod 25.0 mm (0.98 in.) aluminum tube
Drive Shaft 6.15 mm (0.25 in.) flexible shaft
Guide Bar 0.043” Gauge, sprocket nose, 10”
Saw Chain 80-TXL (.325” pitch, low profile)
Motor Type DC / Brushless
Speed 9400 -9800 RPM
Speed control Variable, 2 speed modes
Gear Case Ratio 1.53
Lubrication Lithium based grease
Green blinking - battery is charging
Green - battery is fully charged
Red - Battery is too warm.
Remove for approximately 30 minutes to
cool down
Red blinking - Defective
battery. Remove and replace with new
battery
Charger Lights
OFF Green blinking
OFF Green
Red OFF
Red OFF
blinking