Full Product Manual
Table Of Contents
- Operator’s Manual DPPF-2100 Power Pruner®
- Table of Contents
- Introduction
- Servicing Information
- Safety
- For safe use of your product
- International Symbols
- Read the Manuals
- Clear the Work Area
- Keep a Firm Grip
- Keep a Solid Stance
- Kickback
- Handling the Product
- Equipment
- General Safety Warnings and Instructions for the following ECHO tools: Curved Shaft Edger, Straight Shaft Edger, Tiller Cultivator, or Pole Pruner, or DPAS unit configured as a Curved Shaft Edger, Straight Shaft Edger, Tiller Cultivator, or Pole Pruner.
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- Specifications
- Warranty
- Product Registration
- Notes
DPPF-2100 MAINTENANCE
X7508310400 33
© 8/23 ECHO Incorporated
1. Release power switch
and allow unit to stop.
2. Depress battery latch
release (A) and slide
battery out of power
head.
3. Use compressed air or
a soft bristle brush to
remove debris from
battery and battery
compartment.
Lubrication
Drive Shaft
Level 1.
Parts required: Lithium Based Grease.
1. Remove cutting attachment
locater screw (A).
2. Loosen two bolts (B).
3. Remove cutting attachment
assembly.
4. Remove flex cable (C), wipe
clean and apply 15 ml (0.5 oz.)
of lithium based grease.
5. Slide the flexible cable back in
the drive housing. DO NOT get
dirt on the flex cable.
6. Install and secure cutting
attachment assembly.
A
A
B
B
C