Full Product Manual
Table Of Contents
- Operator’s Manual DPPF-2100 Power Pruner®
- Table of Contents
- Introduction
- Servicing Information
- Safety
- For safe use of your product
- International Symbols
- Read the Manuals
- Clear the Work Area
- Keep a Firm Grip
- Keep a Solid Stance
- Kickback
- Handling the Product
- Equipment
- General Safety Warnings and Instructions for the following ECHO tools: Curved Shaft Edger, Straight Shaft Edger, Tiller Cultivator, or Pole Pruner, or DPAS unit configured as a Curved Shaft Edger, Straight Shaft Edger, Tiller Cultivator, or Pole Pruner.
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- Specifications
- Warranty
- Product Registration
- Notes
DPPF-2100 OPERATION
X7508310400 29
© 8/23 ECHO Incorporated
1. Release power switch (C)
and allow attachment to
stop.
2. If unit does not stop when
power switch is released,
remove the battery to stop
the power supply to product.
Have your authorized
servicing dealer repair unit
before using product again.
Pruning Techniques
Shoulder Harness (if included)
1. Loosen the harness clamp bolt
(A).
2. Put the harness on and attach it
to the clamp ring (B).
3. Adjust harness for comfortable
operation.
4. Tighten harness clamp bolt (A).
The pole pruner attachment is
designed for light to medium
trimming of limbs and branches up
to 203 mm (8 in.) diameter. Follow
these tips for successful operation.
• Plan cut carefully. Check direction
branch will fall.
• Plan retreat path from falling branch. Cut branches bounce when striking
ground.
• Long branches should be removed in several pieces.
• Do not stand directly beneath branch being cut.
A
B
C
A
B