Operator’s Manual DPB-5800T Backpack Blower This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Cancer and Reproductive Harm www.P65Warnings.ca.gov Read and understand all provided literature before use. Failure to do so could result in serious injury.
TABLE OF CONTENTS DPB-5800T TABLE OF CONTENTS Introduction.........................................................................................................................3 Servicing Information..........................................................................................................3 Parts / Serial Number.................................................................................................3 Service.........................................................................
DPB-5800T INTRODUCTION INTRODUCTION Specifications, descriptions and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment. Read and understand all provided literature. Literature contains specifications and information for safety, operation, maintenance, storage, and assembly specific to this product.
SERVICING INFORMATION DPB-5800T Service Service of this product during the warranty period must be performed by an Authorized ECHO Service Dealer. For the name and address of the Authorized ECHO Service Dealer nearest you, ask your retailer or call: 1-800-432-ECHO (3246). Dealer information is also available on our Web Site www.echousa.com. When presenting your unit for Warranty service/ repairs, proof of purchase is required.
DPB-5800T SAFETY SAFETY For safe use of your product Be careful to read this section before using your product. • The precautions described in this section contain important safety information. Please observe them carefully. • You must also read the precautions that appear in the body of the manual itself. Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages preceded by symbols or key words.
SAFETY DPB-5800T International Symbols Symbol Description Symbol Description WARNING! Read and follow all safety precautions in the operator's manual. Failure to follow instructions could result in serious personal injury. Failure to keep loose clothing from being drawn into air intake could result in personal injury. Safety / Alert Failure to keep long hair away from the air inlet could result in personal injury. Wear ear protection when operating this equipment.
DPB-5800T • • SAFETY Avoid blowing debris towards people, pets, open windows, or vehicle when using unit. Review area to be cleared. Look for potential hazards such as stones or metal objects. Keep a Firm Grip • To prevent from dropping the unit, hold the handle in one hand, with thumb and fingers encircling the handle. Keep a Solid Stance • Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach.
SAFETY DPB-5800T Work Area Safety • • • Keep work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. Electrical Safety • • • • • • Power tool plugs must match the outlet. Never modify the plug in any way.
DPB-5800T • • • • • • SAFETY Disconnect the battery from the appliance before making any adjustments, changing accessories, or storing appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times.
SAFETY • • • • • • DPB-5800T Disconnect the plug from the power source and/or the battery from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
DPB-5800T • • • SAFETY Do not use a battery or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. Do not expose a battery or tool to fire or excessive temperature. Exposure to fire or temperature above 130˚C (266˚F) may cause explosion. Follow all charging instructions and do not charge the battery or tool outside the temperature range specified in the instructions.
SAFETY DPB-5800T Discard all toxic materials in a specified manner to prevent contamination of the environment. Before discarding a damaged or worn out Lithium-ion battery, contact your local waste disposal agency, or the local Environmental Protection Agency for information and specific instructions. Take the batteries to a local recycling and/or disposal center, certified for Lithium-ion disposal. If the battery cracks or breaks, with or without leaks, do not recharge it and do not use.
DPB-5800T SAFETY FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate equipment.
SAFETY DPB-5800T ◆◆ Do not attempt to modify this product. Serious injury can result from the use of any modified product. ◆◆ Check unit for loose/missing nuts, bolts, and screws Tighten and/or replace as needed. ◆ ◆ Do not use blower if any part is missing or damaged. ◆◆ Have repairs done only by an authorized service dealer. Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings.
DPB-5800T 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. SAFETY Do not use the machine in bad weather conditions, especially when there is a risk of lightning. This decreases the risk of being struck by lightning. Before use, check the supply cord and any extension cord for signs of damage or aging. Do not touch the cord before disconnecting the supply. Do not use the machine if the cord is damaged or worn. A damaged supply cord may result in electric shock, fire and/or serious injury.
DESCRIPTION DPB-5800T DESCRIPTION Locate the safety label(s) on your unit. Make sure the label(s) is legible and that you understand and follow the instructions on it. If a label cannot be read, a new one can be ordered from your ECHO dealer. Safety label is for example only. Your label my appear slightly different. 4 3 2 1 5 6 1. 2. 3. Trigger switch Cruise control lever Tube button 4. 5. 6.
ASSEMBLY DPB-5800T ASSEMBLY Installing the Wire Holder Clip and Hose Clamp 7 8 1. Clip wires (7) into slot of both wire holder clips (8). 9 2. Insert hose clamps (9) into wire holder clips.
ASSEMBLY DPB-5800T 10 3. 4. Install clamps to both ends of flex pipe (10). Install flex pipe to elbow pipe (11) on blower. 11 Installing the Trigger Handle 12 1. 2. 3. 4. 18 Slide trigger handle (12) onto swivel pipe (13) and loosely attach tightening knob (14). Attach swivel pipe to flex pipe. Tighten both hose clamps. Insert throttle cable into wire holder clips, and secure clips. Position trigger handle for comfortable operation and tighten knob.
DPB-5800T ASSEMBLY Installing the Blower Tubes 1. 2. Align grooves (a) in main pipe (15) with tabs (b) on swivel pipe. Assemble main pipe onto swivel pipe until you feel light resistance. Hold swivel pipe and turn main pipe clockwise, engaging positive locking channels, until connection is firm. Do not force connection. Assemble concentrator nozzle (16) to main pipe as in step 1.
ASSEMBLY DPB-5800T Recommended Ambient Temperature: Charging Low Product (1) High Not Applicable Battery (2)(3) 39°F (4°C) 104°F (40°C) Charger 39°F (4°C) 104°F (40°C) Usage/Discharging Storage Low High Low High 32°F (0°C) 113°F (45°C) 32°F (0°C) 113°F (45°C) 32°F (0°C) 113°F (45°C) 32°F (0°C) 113°F (45°C) 32°F (0°C) 113°F (45°C) Not Applicable (1) Assumes the battery is just off the charger or stored at the temperature range noted for Charger Usage 39° F (4°C) - 104°F (40°C).
DPB-5800T ASSEMBLY Battery Charging Note: See separate operator’s manuals packaged with battery and charger. • • • • • • • • • • • • • • • • • Use only with ECHO eFORCE® 56V battery series batteries and chargers. Keep charger and battery away from damp conditions and all liquids. Do not operate the charger on an easily combustible surface (e.g. paper, textiles) or in an environment with a high risk of fire. Do not cover the charger. Covering the charger will prevent it from cooling.
ASSEMBLY 1. 2. 3. Plug charger AC cord in the wall outlet. Align ridges on battery with grooves on charger, and slide battery into charger. During normal charging, the charger LED (A) will blink GREEN. DPB-5800T A If charger detects a problem, LED will blink RED. Remove battery from charger, clear obstructions from contacts and reinstall battery into charger. If battery is outside acceptable temperature range (See Recommended Ambient Temperature chart) LED will remain RED. 4. 5. 6.
DPB-5800T ASSEMBLY Installing and Removing the Batteries The blower will operate when the battery is installed. Make sure the blower is properly positioned to prevent loss of control and possible serious injury. See separate Operator's Manual Packaged with the Battery. The battery comes partially charged from the factory and needs to be fully charged before first use. Installing the Batteries 1. 2. 3. • • • Align ribs on batteries with grooves in the battery compartment.
ASSEMBLY DPB-5800T Removing the Batteries 1. 2. Push and hold the battery release button (5). Remove batteries from the machine. 5 Adjusting the Harness 1. 2. 3. 4. 24 Fit the backpack on your back. Pull the ends of the straps down to tighten the harness. Connect the horizontal chest strap. Pull the end of the chest strap to tighten.
DPB-5800T 5. Lift the tabs of the adjusters to loosen the straps. 6. Lock the quick-release fastener by pushing it together. 7. Squeeze the hooks to open the quick-release fastener.
OPERATING BLOWER DPB-5800T OPERATING BLOWER Always wear safety glasses, hearing protection and a face filter mask or serious personal injury may result. Do not point the blower pipe in the direction of people or pets. Read the Safety Section carefully. To avoid damage to the unit due to over-revving, do not block blower pipe. 1. Trigger Switch Pull trigger switch to start machine and increase speed. Release trigger switch to reduce speed or turn machine off. 2.
DPB-5800T OPERATING BLOWER Note: Never use a higher speed setting than necessary to perform a task. Remember, the higher the engine speed, the louder the blower noise. 7. Minimize dust by using blower at lower speeds or dampen surface with water. Blower can be used to clean most surfaces when water conservation is desired. 8. Use the full blower pipe configuration when blowing. 9. After using blowers and other equipment, CLEAN UP! Dispose of debris in trash receptacles.
MAINTENANCE DPB-5800T MAINTENANCE Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop unit and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces. Operating a poorly maintained unit can result in serious injuries to operator or bystanders.
DPB-5800T MAINTENANCE Skill Levels Level 1 = Easy to do. Common tools may be required. Level 2 = Moderate difficulty. Some specialized tools may be required. Level 3 = See your dealer. Maintenance Intervals COMPONENT/ SYSTEM MAINTENANCE PROCEDURE SKILL LEVEL INTERVAL Screws/Nuts/Bolts I n s p e c t / Ti g h t e n / Replace 1 Before Each Use Battery and Battery Compartment Inspect / Clean 1 Before Each Use If not maintained properly, the product may pose a serious risk to physical health.
TROUBLESHOOTING DPB-5800T Cleaning Battery and Battery Compartment The machine must be dry. Humidity can cause risks of elestrical shocks. 1. 2. 3. Clear the unwanted material out of the air vent with a vacuum cleaner. Do not spray the air vent or put the air vent in solvents. Clean the battery compartment (8) and the plastic components with a moist and soft cloth. TROUBLESHOOTING Problem Cause The batteries are not installed tightly.
DPB-5800T STORAGE STORAGE Storage After Use When storing the product for long periods of time, ensure that the following preparations for storage are carried out. Blower Do not store your unit without performing protective storage maintenance which includes the following: 1. Clean the unit before storage. 2. Remove battery from blower. 3. Remove accumulation of dirt and debris from exterior of unit. 4. Tighten all screws and nuts. 5. Replace the damaged parts. 6. Cover battery compartment of blower. 7.
SPECIFICATIONS DPB-5800T SPECIFICATIONS MODEL DPB-5800T Voltage 56 V DC Air volume 795 CFM* Air speed 195 MPH** Weight (without battery and charger) 15.43 Ibs (7.0 kg) Battery: Model ECHO eFORCE® 56V battery series batteries Type Li-Ion Voltage 56 (rated 50.4) Charger type CC-CV Charger input voltage 120V AC 60Hz Charger model ECHO eFORCE® 56V battery series charger Charge Time See Battery Operator's Manual *with (2) 5.
DPB-5800T PRODUCT REGISTRATION PRODUCT REGISTRATION Thank you for choosing ECHO Power Equipment Please go to http://www.echo-usa.com/Warranty/Register-Your-ECHO to register your new product on-line. It's FAST and EASY! NOTE: your information will never be sold or misused by ECHO, Incorporated. Registering your purchase enables us to contact you in the unlikely event of a service update or product recall, and verifies your ownership for warranty consideration.
PRODUCT REGISTRATION 34 DPB-5800T 99922238094 © 05/2023 ECHO Incorporated
DPB-5800T WARRANTY Limited Warranty Statement for ECHO 56 Volt Handheld Products and Walk Behind Mowers sold in USA and Canada ECHO Incorporated warrants to the original retail purchaser that this ECHO brand 56 Volt outdoor product is free from defects in material and workmanship and agrees to repair or replace, at ECHO Incorporated’s discretion, any defective product free of charge within these time periods from the date of purchase: ■ If the product is for homeowner use: • Units and Bare Tool – 5 Years
WARRANTY DPB-5800T This warranty does not cover normal deterioration due to the use or exposure, and any repairs made necessary by normal wear, improper maintenance, improper lubrication, improper storage, dirt, abrasives, impact, moisture, water, rain, snow, rust, corrosion, varnish, or other similar conditions.
DPB-5800T WARRANTY This warranty applies to all ECHO brand 56 Volt outdoor products manufactured by or for ECHO Incorporated, and sold in the United States and Canada. To locate your nearest authorized ECHO dealer, visit www.ECHO-usa.com or dial 1-800-432-ECHO (3246).
NOTES DPB-5800T NOTES 38 99922238094 © 05/2023 ECHO Incorporated
DPB-5800T 99922238094 © 05/2023 ECHO Incorporated NOTES 39
430BPB000001 - 430BPB999999 431BPB000001 - 431BPB999999 ECHO INCORPORATED 400 Oakwood Road Lake Zurich, IL 60047 www.echo-usa.
