Use and Care Manual

MAINTENANCE DPAS-2600SB
36 X7508230800
©11/21 ECHO Incorporated
Drive Shaft (Upper)
1. Loosen handle clamping screw
(B) and slide throttle handle
forward.
2. Loosen clamping screw (C)
and slide shaft out of power
head.
3. Pull flex cable (D) out of shaft
housing, wipe clean and re-
coat with 15 ml (0.5 oz.)
grease.
4. Slide flex cable (D) back into
shaft housing. DO NOT get dirt
on flex cable.
5. Reassemble in reverse order.
Nylon Line Replacement
Wear gloves or personal injury may result:
◆ Cutoff knife is sharp.
◆ Gearcase and surrounding area may be hot.
Never use wire or wire-rope that can break off and become a
dangerous “projectile”. Serious injury can occur.
B
C
D