Full Product Manual
Table Of Contents
- Operator’s Manual DPAS-2600 Pro Attachment Series™
- Table of Contents
- Introduction
- Servicing Information
- Safety
- Manual Safety Symbols and Important Information
- International Symbols
- Read the Manuals
- Clear the Work Area
- Keep a Firm Grip
- Keep a Solid Stance
- Handling the Product
- Equipment
- General Safety Warnings and Instructions for the following ECHO tools: Curved Shaft Edger, Straight Shaft Edger, Tiller Cultivator, or Pole Pruner, or DPAS unit configured as a Curved Shaft Edger, Straight Shaft Edger, Tiller Cultivator, or Pole Pruner.
- General Safety Warnings and Instructions for the following ECHO tool: Blower or DPAS unit configured as a Blower.
- General Safety Warnings and Instructions for the following ECHO tools: Hedge Trimmer, Mid-Reach Hedge Trimmer, Shafted Hedge Trimmer, or Articulating Hedge Trimmer, or DPAS unit configured as a Hedge Trimmer, Mid-Reach Hedge Trimmer, Shafted Hedge Tr...
- General Safety Warnings and Instructions for the following ECHO tools: All DSRM and DGT models, and DPAS units configured as trimmers and brush cutters.
- This section contains additional warnings and instructions contained in UL 62841-4-2 and 62841-4- 4.
- For grass trimmers, brush cutters, and brush saws, according to the type of supplied cutting accessory:
- For hedge trimmers:
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- Specifications
- Warranty
- Product Registration
- Notes
TROUBLESHOOTING DPAS-2600
50 X7508230802
©10/23 ECHO Incorporated
TROUBLESHOOTING
TROUBLESHOOTING CHART
Problem Cause Remedy
Red Charger light
flashes or does not light
up
Plug not connected
to power outlet.
Plug in charger.
Battery pack not
installed properly.
Check the battery
installation.
Obstructed
connection.
Reinstall battery after
removing obstructions.
Fault in the charger. Consult your dealer.
Fault in the battery
pack.
Consult your dealer.
Unit will not turn on
Battery pack not
installed properly.
Check battery
installation.
Unit does not run when
turned on
Battery pack
discharged.
Charge battery .
Battery pack outside
acceptable
temperature range.
Remove the battery
and allow to cool.
Running time is too
short
Battery pack outside
acceptable
temperature range.
Remove battery and
allow to cool.
Unit electronics too
hot.
Turn unit off and allow
to cool.
Battery pack
discharged.
Charge the battery.