Full Product Manual
Table Of Contents
- Operator’s Manual DPAS-2600 Pro Attachment Series™
- Table of Contents
- Introduction
- Servicing Information
- Safety
- Manual Safety Symbols and Important Information
- International Symbols
- Read the Manuals
- Clear the Work Area
- Keep a Firm Grip
- Keep a Solid Stance
- Handling the Product
- Equipment
- General Safety Warnings and Instructions for the following ECHO tools: Curved Shaft Edger, Straight Shaft Edger, Tiller Cultivator, or Pole Pruner, or DPAS unit configured as a Curved Shaft Edger, Straight Shaft Edger, Tiller Cultivator, or Pole Pruner.
- General Safety Warnings and Instructions for the following ECHO tool: Blower or DPAS unit configured as a Blower.
- General Safety Warnings and Instructions for the following ECHO tools: Hedge Trimmer, Mid-Reach Hedge Trimmer, Shafted Hedge Trimmer, or Articulating Hedge Trimmer, or DPAS unit configured as a Hedge Trimmer, Mid-Reach Hedge Trimmer, Shafted Hedge Tr...
- General Safety Warnings and Instructions for the following ECHO tools: All DSRM and DGT models, and DPAS units configured as trimmers and brush cutters.
- This section contains additional warnings and instructions contained in UL 62841-4-2 and 62841-4- 4.
- For grass trimmers, brush cutters, and brush saws, according to the type of supplied cutting accessory:
- For hedge trimmers:
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- Specifications
- Warranty
- Product Registration
- Notes
DPAS-2600 SAFETY
X7508230802 17
©10/23 ECHO Incorporated
10. Don't Overreach - Keep proper footing and balance at all times.
11. Stay Alert - Watch what you are doing. Use common sense. Do not
operate appliance when you are tired.
12. Store Idle Tools Indoors - When not in use, tools should be stored
indoors in dry, locked place out of reach of children with the battery
removed.
13. Maintain Tool with Care - Keep cutting edge sharp and clean for best
performance and to reduce the risk of injury. Follow instructions for
lubricating and changing accessories. Keep handles dry, clean, and
free from oil and grease.
14. Check Damaged Parts - Before further use of the appliance, a guard or
other part that is damaged should be carefully checked to determine
that it will operate properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts, breakage of parts,
mounting, and any other condition that may affect its operation. A guard
or other part that is damaged should be properly repaired or replaced
by an authorized service center unless indicated elsewhere in this
manual.
15. Edger
• Keep guards in place and in working order.
• Keep metal blades sharp.
• Keep hands and feet away from cutting area
16. Cultivator
• Keep hands away from blades.
17. Pole Pruner
• Keep all parts of the body away from the saw chain. Do not remove cut
material or hold material to be cut when blades are moving. Make sure
the switch is off when clearing jammed material. Saw chain continues
to move after the switch is turned off. A moment of inattention while
operating the extended-reach pruner may result in serious personal
injury.
• Carry the extended-reach pruner by the handle with the saw chain
stopped. When transporting or storing the extended-reach pruner,
always fit the saw chain device cover. Proper handling of the extended-
reach pruner will reduce possible personal injury from the saw chain.
• Hold the extended-reach pruner by insulated gripping surfaces only,
because the saw chain may contact hidden wiring. A saw chain
contacting a "live" wire may make exposed metal parts of the
extended-reach pruner "live" and could give the operator an electric
shock.
• Do not use the extended-reach pruner in bad weather conditions,
especially when there is a risk of lightning. This decreases the risk of
being struck by lightning.