Full Product Manual
Table Of Contents
- Operator’s Manual DHCS-2800 / 3400 Hedge Trimmer
- Table of Contents
- Introduction
- Servicing Information
- Safety
- For safe use of your product
- International Symbols
- Read the Manuals
- Clear the Work Area
- Keep a Firm Grip
- Keep a Solid Stance
- Handling the Product
- Equipment
- General Safety Warnings and Instructions for the following ECHO tools: Hedge Trimmer, Mid-Reach Hedge Trimmer, Shafted Hedge Trimmer, or Articulating Hedge Trimmer, or DPAS unit configured as a Hedge Trimmer, Mid-Reach Hedge Trimmer, Shafted Hedge Tr...
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- Specifications
- Warranty
- Product Registration
- Notes
DHCS-2800 / 3400 MAINTENANCE
X7508280301 29
© 12/23 ECHO Incorporated
Blades
Hedge trimmer blades are very sharp, touching them may lead
to severe personal injury. Use long hex wrenches and sockets
with extensions when tightening blade bolts and blade lock nuts
to keep hands at a safe distance from sharp blades.
Blades should only be removed and reinstalled by an authorized
servicing dealer, otherwise premature wear or internal damage may
occur.
Accessing Blade Edges
For blade maintenance procedures or inspection, blades can be manually
moved to separate top and bottom blade teeth.
1. Remove plug bolt (A).
2. Insert M4 bolt (B), at least
15mm long (not included)
into bolt hole.
3. Rotate bolt to manually
move blade teeth for access
to cutting edges.
Lubrication
Level 1
Parts required: ECHO Red Armor™ Blade Cleaner & Lubricant, or 20W
Engine Oil (for blade lubrication), 50-50 mixture of kerosene and 20W oil
(for blade cleaning).
1. Brush loose debris from blade and coat both sides of blade with the 50
- 50 cleaning mixture
2. Allow cleaning mixture to
soften remaining gummy
residue, then wipe blade
clean.
3. Apply clean oil to bolt slots
(C).
4. Wipe excess oil from blade.
A
B
C