Full Product Manual
Table Of Contents
- Operator’s Manual DHC-2200 / 2800 Hedge Trimmer
- Table of Contents
- Introduction
- Servicing Information
- Safety
- For safe use of your product
- International Symbols
- Read the Manuals
- Clear the Work Area
- Keep a Firm Grip
- Keep a Solid Stance
- Handling the Product
- Equipment
- General Safety Warnings and Instructions for the following ECHO tools: Hedge Trimmer, Mid-Reach Hedge Trimmer, Shafted Hedge Trimmer, or Articulating Hedge Trimmer, or DPAS unit configured as a Hedge Trimmer, Mid-Reach Hedge Trimmer, Shafted Hedge Tr...
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- 36/4Specifications
- Warranty
- Product Registration
DHC-2200 / 2800 MAINTENANCE
X7508280400 29
© 07/23 ECHO Incorporated
Adjustment
Level 2.
• DHC-2200: Two blade bolts
nearest blade tip are
adjustable.
• DHC-2800: Two blade bolts
nearest blade tip, and fourth
blade bolt from blade tip are
adjustable.
ONLY blade bolts indicated should be adjusted. All other bolts should
be tightened snugly.
1. Loosen blade locknuts (D) 1/
2 turn.
2. Tighten blade bolts (E) until
snug.
3. Loosen blade bolts 1/2 turn.
Note: When bolt adjustment
is correct, there should
be a gap of 0.25 -0.50
mm between the cutter
blades and the flat washers, and the flat washer beneath
each bolt head should turn freely.
D
E