Full Product Manual
Table Of Contents
- Operator’s Manual DHC-2200 / 2800 Hedge Trimmer
- Table of Contents
- Introduction
- Servicing Information
- Safety
- For safe use of your product
- International Symbols
- Read the Manuals
- Clear the Work Area
- Keep a Firm Grip
- Keep a Solid Stance
- Handling the Product
- Equipment
- General Safety Warnings and Instructions for the following ECHO tools: Hedge Trimmer, Mid-Reach Hedge Trimmer, Shafted Hedge Trimmer, or Articulating Hedge Trimmer, or DPAS unit configured as a Hedge Trimmer, Mid-Reach Hedge Trimmer, Shafted Hedge Tr...
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- 36/4Specifications
- Warranty
- Product Registration
OPERATION DHC-2200 / 2800
24 X7508280400
© 07/23 ECHO Incorporated
This model is equipped with
a rotating throttle handle that
can be turned 45° or 90° to
either side of vertical
operating position to help
reduce operator fatigue and
improve precision trimming.
To operate
1. Fully release power
switch.
2. Push enable button to turn
off power to unit.
3. Depress handle release lever (A).
4. Rotate handle in desired direction and release the lever. Handle locks
into place at 45° or 90° to either side of vertical.
Note: Power switch will not operate when throttle handle is not
locked into position.
Hedge Trimming
Hedge trimmer blades are very sharp. Touching them may lead
to severe personal injury. Avoid touching blades whenever
possible, and always wear gloves to protect hands.
1. Always grip support and throttle
handles.
2. Hold trimmer firmly and
squeeze power switch to trim.
3. Tilt trimmer so cutting teeth are
angled slightly toward the
hedge or shrub and proceed to
cut.
Never remove hands from unit when blades are moving.
A