Full Product Manual
Table Of Contents
- Operator’s Manual DHC-2200 / 2800 Hedge Trimmer
- Table of Contents
- Introduction
- Servicing Information
- Safety
- For safe use of your product
- International Symbols
- Read the Manuals
- Clear the Work Area
- Keep a Firm Grip
- Keep a Solid Stance
- Handling the Product
- Equipment
- General Safety Warnings and Instructions for the following ECHO tools: Hedge Trimmer, Mid-Reach Hedge Trimmer, Shafted Hedge Trimmer, or Articulating Hedge Trimmer, or DPAS unit configured as a Hedge Trimmer, Mid-Reach Hedge Trimmer, Shafted Hedge Tr...
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- 36/4Specifications
- Warranty
- Product Registration
OPERATION DHC-2200 / 2800
22 X7508280400
© 07/23 ECHO Incorporated
OPERATION
Starting Unit
The attachment will operate when the battery is installed, the
power indicator LED is lit, and the operator presence switches,
and power switch are engaged. Make sure the unit is properly
positioned to prevent loss of control and possible serious
injury.
Note: This model has two operating modes: low and high. Use
speed button (E) to move between low mode (L) and high
mode (H). Use power switch to increase RPM speed within
each mode.
1. Keep movable parts
of the attachment
away from objects
that could become
entangled or thrown,
and surfaces that
could cause loss of
control.
2. Push enable button
(A) once to turn on
power to unit. Power
indicator LED (B)
illuminates when
power to unit is
turned on.
3. Hold down operator presence switches (C). Then depress power switch
(D) to increase speed.
E
C
B
C
A
D