User Manual

25
Specifications
Specifications
These specifications are subject to change without notice.
 The declared vibration total value has been measured in accordance with a standard test method and may be used for com-
paring one tool with another.
 The declared vibration total value may also be used in a preliminary assessment of exposure.
DHC-200
Mass:
without battery kg 3.3
with battery kg 4.3
Cutting device:
Type Dual action, double sided
Cutting length mm 624
Pitch mm 30
Height mm 20
Gear ratio and lubrication 12.2 reduction and good quality lithium grease
External Dimensions: length × width × height
(with battery)
mm 1196 × 232 × 197
Battery:
Type Li-Ion
Pack voltage V 56 (rated 50.4)
Charger type CCCV
Charger input voltage V AC 230 - 240
Battery Charger Lights: Red LED – Battery is outside charging temperature
range
Red LED Blinking – Fault
Green LED – Battery finished charging
Green LED Blinking – Battery is charging normally
Charge Time: LBP-560-100 battery: Approximately 42 minutes.
LBP-560-200 battery: Approximately 88 minutes.
Sound Pressure Level: (EN60745-2-15) dB(A) 70.4
Sound Power Level: (EN60745-2-15) dB(A) 81
Uncertainty dB(A) 3
Vibration levels: (EN60745-2-15)
Front handle m/s² 2.2
Rear handle m/s² 2.9
Uncertainty:K m/s² 1.5