Use and Care Manual
Table Of Contents
- Operator’s Manual DCS-2500TN Chainsaw
- Table of Contents
- Introduction
- Safety
- For safe use of your product
- International Symbols
- Location in which the safety decal is attached
- Handling the Product
- Chainsaw Safety Warnings
- Causes and Operator Prevention of Kickback
- Kickback Safety Precautions
- General Precautions
- Precautions for Use
- Users of the product
- Environment of Use and Operation
- Vibration and Cold
- Repetitive stress injuries
- Transport of the product
- Starting the unit
- Once the unit has started, check for abnormal vibrations and sounds.
- Disconnect the battery:
- Do not touch high temperature or high voltage components while the product is running.
- Turn off the unit when checking or maintaining the product.
- Turn off the unit immediately if anything goes wrong.
- A ten meter radius is a danger zone.
- Using the product.
- Make sure that the saw chain is stopped before putting the unit on the ground
- Protective Gear
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- Specifications
- Product Registration
- Warranty
- Notes
SAFETY DCS-2500TN
8 X7508220500
© 7/23 ECHO Incorporated
• If the decal becomes illegible due to wear and tear, damage, or peels off,
please purchase a replacement decal from your dealer and attach it in the
location shown in the illustration below. Ensure that the decal is readable
at all times.
Note: The safety decal is for example only. Your label may appear slightly
different
Handling the Product
General Safety Warnings and Instructions
This section contains the prescribed general safety warnings and
instructions for battery-powered products contained in UL 2595 and for
handheld tools, transportable tools and lawn and garden machinery
contained in UL 62841-1. Additional important warnings and instructions
are provided in subsequent sections of this manual.
Important Safety Instructions
Read all safety warnings, instructions, illustrations, and
specifications provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire,
serious injury and/or property damage.