Use and Care Manual
Table Of Contents
- Operator’s Manual DCS-2500TN Chainsaw
- Table of Contents
- Introduction
- Safety
- For safe use of your product
- International Symbols
- Location in which the safety decal is attached
- Handling the Product
- Chainsaw Safety Warnings
- Causes and Operator Prevention of Kickback
- Kickback Safety Precautions
- General Precautions
- Precautions for Use
- Users of the product
- Environment of Use and Operation
- Vibration and Cold
- Repetitive stress injuries
- Transport of the product
- Starting the unit
- Once the unit has started, check for abnormal vibrations and sounds.
- Disconnect the battery:
- Do not touch high temperature or high voltage components while the product is running.
- Turn off the unit when checking or maintaining the product.
- Turn off the unit immediately if anything goes wrong.
- A ten meter radius is a danger zone.
- Using the product.
- Make sure that the saw chain is stopped before putting the unit on the ground
- Protective Gear
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- Specifications
- Product Registration
- Warranty
- Notes
MAINTENANCE DCS-2500TN
58 X7508220500
© 7/23 ECHO Incorporated
Replacement Guide Bar and Chain
Only use replacement bars and chains specified by the manufacture
or the equivalent. Otherwise, there may be a risk of accidents and
damage to the machine.
BAR P/N CHAIN P/N
CHAIN
TYPE
LINKS PITCH GAUGE
305 mm (12 in.)
narrow bar
P/N
12A4CD3351
80TXL51C
Q
80 51
0.325
in.
0.043
in.