Use and Care Manual
Table Of Contents
- Operator’s Manual DCS-2500TN Chainsaw
- Table of Contents
 - Introduction
 - Safety
- For safe use of your product
 - International Symbols
 - Location in which the safety decal is attached
 - Handling the Product
 - Chainsaw Safety Warnings
 - Causes and Operator Prevention of Kickback
 - Kickback Safety Precautions
 - General Precautions
 - Precautions for Use
- Users of the product
 - Environment of Use and Operation
 - Vibration and Cold
 - Repetitive stress injuries
 - Transport of the product
 - Starting the unit
 - Once the unit has started, check for abnormal vibrations and sounds.
 - Disconnect the battery:
 - Do not touch high temperature or high voltage components while the product is running.
 - Turn off the unit when checking or maintaining the product.
 - Turn off the unit immediately if anything goes wrong.
 - A ten meter radius is a danger zone.
 - Using the product.
 - Make sure that the saw chain is stopped before putting the unit on the ground
 
 - Protective Gear
 
 - Description
 - Contents
 - Assembly
 - Operation
 - Maintenance
 - Troubleshooting
 - Storage
 - Specifications
 - Product Registration
 - Warranty
 - Notes
 
 
SAFETY DCS-2500TN
26 X7508220500
© 7/23 ECHO Incorporated
Wear proper clothing
Do not wear ties, jewelry, or loose, dangling clothing which could be 
caught in the unit. Do not wear open-toe footwear, or go bare foot or 
barelegged.
Failure to observe these precautions could result in an accident or lead to 
a serious injury. 










