Use and Care Manual
Table Of Contents
- Operator’s Manual DCS-2500T Chainsaw
- Table of Contents
- Introduction
- Safety
- For safe use of your product
- International Symbols
- Location in which the safety decal is attached
- Handling the Product
- Chainsaw Safety Warnings
- Causes and Operator Prevention of Kickback
- Kickback Safety Precautions
- General Precautions
- Precautions for Use
- Users of the product
- Environment of Use and Operation
- Vibration and Cold
- Repetitive stress injuries
- Transport of the product
- Starting the unit
- Once the unit has started, check for abnormal vibrations and sounds.
- Disconnect the battery:
- Do not touch high temperature or high voltage components while the product is running.
- Turn off the unit when checking or maintaining the product.
- Turn off the unit immediately if anything goes wrong.
- A ten meter radius is a danger zone.
- One-handed use is intended for trained tree service professionals only.
- Using the product.
- Make sure that the saw chain is stopped before putting the unit on the ground
- Protective Gear
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- Specifications
- Product Registration
- Warranty
- Notes
ASSEMBLY DCS-2500T
34 X7508220201
© 4/22 ECHO Incorporated
Installing the Battery
The chainsaw will operate when the battery is installed, the
power indicator LED is lit, and the trigger switch and trigger
switch lockout are engaged. Make sure the chainsaw is properly
positioned to prevent loss of control and possible serious
injury. Keep movable parts of the chainsaw off the ground and
away from objects that could become entangled.
Note: The battery comes partially charged from the factory and
needs to be fully charged before first use.
1. Push front hand guard
forward. (Chain brake
ACTIVATED position).
2. Make sure power indicator
LED is turned off.
3. Align ridges on battery
with groove on chainsaw,
and insert battery until
battery latch (A) is fully
engaged, and a clicking
sound is heard.
Before using the chainsaw, make sure that
battery is installed correctly with battery
latch in the fully engaged, upright position.
A