Use and Care Manual
Table Of Contents
- Operator’s Manual DCS-2500T Chainsaw
- Table of Contents
- Introduction
- Safety
- For safe use of your product
- International Symbols
- Location in which the safety decal is attached
- Handling the Product
- Chainsaw Safety Warnings
- Causes and Operator Prevention of Kickback
- Kickback Safety Precautions
- General Precautions
- Precautions for Use
- Users of the product
- Environment of Use and Operation
- Vibration and Cold
- Repetitive stress injuries
- Transport of the product
- Starting the unit
- Once the unit has started, check for abnormal vibrations and sounds.
- Disconnect the battery:
- Do not touch high temperature or high voltage components while the product is running.
- Turn off the unit when checking or maintaining the product.
- Turn off the unit immediately if anything goes wrong.
- A ten meter radius is a danger zone.
- One-handed use is intended for trained tree service professionals only.
- Using the product.
- Make sure that the saw chain is stopped before putting the unit on the ground
- Protective Gear
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- Specifications
- Product Registration
- Warranty
- Notes
CONTENTS DCS-2500T
28 X7508220201
© 4/22 ECHO Incorporated
CONTENTS
• The following parts are packed separately in the packing box.
• When you have unpacked the box, please check the parts that it contains.
• Contact your dealer if anything is missing or broken.
ASSEMBLY
Assembly
Mounting guide bar and chain
Always remove the battery before performing any of the
following operations, otherwise serious personal injury might
result.
Number Part Name Quantity
1Chainsaw 1
2 Guide Bar Cover 1
3 Operator’s Manual 1
4T wrench 1